EMT Practice Test

1. Question Content...

---

Question1: You want to replace the key management passphrase of a FAS8200 system using onboard NetApp Storage Encryption (NSE).
Which action accomplishes this task?

Question2: You have a volume in an SVM that needs to be moved to a different SVM. You do not have room to copy the volume to the other SVM.
Which ONTAP command will accomplish this task?

Question3: Click the Exhibit button.

Referring to the exhibit, which statement is true?

Question4: You want to permanently reassign ownership of an aggregate to a node's partner.
What should you do to accomplish this task?

Question5: What is a characteristic of a single-node cluster?

Question6: Click the Exhibit button.

Referring to the exhibit, the write operations would be compacted into how many WAFL blocks?

Question7: An administrator enabled the iSCSI protocol on an SVM and created a LUN for a Windows 2016 system.
After rescan, the LUN is not visible on the host.
Which two steps must the administrator take to solve this problem? (Choose two.)

Question8: You just finished upgrading a cluster to ONTAP 9.1 and would like to enable NetApp Volume Encryption (NVE) on an existing volume. You do not have NetApp Storage Encryption (NSE) drives installed.
Which three steps would you take to accomplish this task? (Choose three.)

Question9: NetApp ONTAP uses Snapshot copies for which two features? (Choose two.)

Question10: At which level of granularity would you back up data to tape using the SMTapecommand?

Question11: What is an array LUN?

Question12: An administrator is designing an ONTAP solution that consists of eight FAS8200 nodes in a single cluster.
Each node will use four ports for cluster connections.
Which cluster interconnect switch model should be used in this scenario?

Question13: Click the Exhibit button.

The size of the aggr1 RAID group shown in the exhibit is 8.
What is the RAID type?

Question14: You have a SnapLock Compliance volume that needs to be replicated to a different cluster at a disaster recovery site.
Which two statements concerning the SnapMirror destination volume are true? (Choose two.)

Question15: Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

Question16: What are three volume-level storage efficiency features of ONTAP? (Choose three.)

Question17: Click the exhibit button.

Referring to the exhibit, you have a FlexGroup volume that is 250 TB with 10 constituents. You apply the volume modify -vserver fg1_vs -volume fg1 -size 350TBcommand.
What affect does the command have on the FlexGroup volume and its constituents?

Question18: You have a read-only volume that needs protection within the cluster, but you do not have a SnapMirror license.
Which mirror type would you use to protect the volume?

Question19: Click the Exhibit button.

On the first LUN entry shown in the exhibit, a hyphen (-) appears under reporting-nodes.
What are two reasons why the hyphen appears? (Choose two.)

Question20: Click the Exhibit button.

You are receiving reports of high storage latency from the database administrators. The NetApp storage system is connected to the network using 10 Gb. You run the sysstatcommand as shown in the exhibit.
In this scenario, why is storage latency high?

Question21: You create a FlexVol volume to host files for a Windows-based application. The administrator of the application is a Windows user. The application does not support files access by Linux users.
Which security style should you assign to the volume?

Question22: You want to use UTA2 ports for native FC LUN access.
How do you accomplish this task?

Question23: To configure high availability within a FAS8080 EX HA pair, which two statements are correct? (Choose two.)

Question24: Click the Exhibit button.

While reviewing the port health shown in the exhibit, you notice that port e0c on node1 is degraded.
What would cause this problem?

Question25: A customer has created an SVM in an 8-node cluster with only FC licensed on all nodes. The customer wants to limit the number of paths visible to each host.
Which three technologies accomplish this task? (Choose three.)

Question26: Click the exhibit button.

You have a 2-node cluster named cl1 that has separate LIFs on each node for both SAN and NAS traffic.
A storage failover takeover process is initiated as shown in the exhibit.
In this scenario, which two statements about the takeover process are true? (Choose two.)

Question27: Users report that they are unable to connect to home directories stored on a NetApp cluster. You are using Active Directory-based Kerberos authentication.
Which two actions would correct the problem? (Choose two.)

Question28: You need to duplicate a production LUN for quality assurance testing. The LUN resides in svm_prod and needs to be available in svm_qa. Both SVMs reside on the same cluster.
Which step will accomplish this task?

Question29: Click the Exhibit button.

An administrator has a 4-node FAS8200 cluster, as shown in the exhibit. A failover process is initiated to reboot node cl1-02.
Regarding storage failover giveback processes, which statement is true?

Question30: Click the exhibit button.

In reference to the NFS export-policy rules shown in the exhibit, NFS clients mounted to /data1 from the
192.168.1.0/24, 192.168.2.0/24 and 192.168.3.0/24 subnets are able to mount /data1 and read files but are unable to edit files or write new files. All other subnets require read-only access to /data1.
What must you do to allow write access to the three subnets while allowing read-only access to all other subnets in this scenario?

Question31: Click the Exhibit button.

Referring to the exhibit, which two statements about the connectivity from the 2-node cluster to the cluster interconnects are true? (Choose two.)

Question32: Click the Exhibit button.

You create a new SnapMirror relationship, but is fails to initialize. The SnapMirror relationship is configured as shown in the exhibit.
How would you solve this problem?

Question33: When a two-node cluster is expanded, which cluster configuration would be supported?

Question34: A customer has a 1,000 GB volume used as a NAS share that has 3x 100 GB files and has no existing Snapshot copies. The customer creates a Snapshot copy of the volume, adds a 500 Gb file to the volume, and then deletes one of the 100 GB files from the volume.
How much free space is in the volume in this scenario?

Question35: Click the Exhibit button.

You manage a multi-tenant NetApp storage system. You start configuring an SVM for a new customer and receive the error shown in the exhibit when you attempt to create a LIF. You verify that the IP address is correct and that the customer LIF does not already exist. However, you see that another customer is using the same IP address in their SVM.
How would you correct this problem?

Question36: You have a cluster of FAS controllers with HDD aggregates. The data is being compressed into 32 KB blocks before being written to a volume.
In this scenario, which type of compression is being used?

Question37: To log in to the cluster with OnCommand System Manager, a cluster administrator account must be authorized for which two application types? (Choose two.)

Question38: The NVM Express (NVMe) flash capacity is upgradeable in which two systems? (Choose two.)

Question39: Which network interface failover group target ports are available when the system-definedfailover policy is used?

Question40: Which CLI command is used to move epsilon to a new node?

Question41: Click the Exhibit button.

You create a volume as shown in the exhibit.
Which statement about the new volume is true?

Question42: Which LIF role type is used by a volume moveoperation between nodes?

Question43: You are creating the source and destination SVMs for a new SVM disaster recovery relationship.
Which SVM set of subtypes should you choose?

Question44: You have a FlexVol volume with LUNs and need to set policies to prevent an ENOSPC error on the host.
In this scenario, which two commands will keep the LUN available to the host? (Choose two.)

Question45: Click the Exhibit button.

You have a 2-node NetApp cluster. You perform a storage failover and notice that IP address 10.1.100.21 is unreachable while omegana1-01 is rebooting. After omegana1-01 is back online, the IP address becomes reachable again. However, IP address 10.1.100.20 was still reachable during the reboot. The commands shown in the exhibit were executed before the storage failover.
In this scenario, why was IP address 10.1.100.21 unreachable?

Question46: Which two link layer discovery protocols does NetApp ONTAP support? (Choose two.)

Question47: You are configuring an ONTAP solution for FC host connectivity.
In this scenario, how should the cluster be configured? (Choose two.)

Question48: Click the Exhibit button.

The maximum RAID group size of the RAID-DP aggr1 shown in the exhibit is 18. You expand the aggregate by 20 disks.
How many of the new disks are used for data?

Question49: Which two features provide physical path resiliency from a Windows 2016 server to an iSCSI LUN on a 12- node ONTAP cluster? (Choose two.)

Question50: Click the Exhibit button.

After logging into an SVM using the vsadmin user account, you are able to see existing volumes, but are unable to create new volumes.
Referring to the configuration shown in the exhibit, what is the problem?

Question51: A storage administrator wants to recover a file from a snapshot. The rest of the data in this volume should be preserved.
In this scenario, which command would you use?

Question52: Click the exhibit button.

Referring to the exhibit, which statement about the volume move process is true?

Question53: Click the Exhibit button.

An administrator installed UTA2 PCIe cards into an existing FAS8200 HA pair. The new cards will be used for native FC traffic. The administrator wants to configure the UTA2 ports for FC client access.
Referring to the exhibit, which two actions address the requirement? (Choose two.)

Question54: What is the minimum number of disks required to create a data aggregate with a RAID type of RAID-TEC?

Question55: Which NetApp management tool verifies the disk-shelf cabling of an existing NetApp cluster?

Question56: Which command prompt is displayed when a cluster named cl1 is in Advanced privilege mode?

Question57: Which two features are supported by SnapLock Enterprise but not by SnapLock Compliance? (Choose two.)

Question58: You have a 2-node NetApp cluster. You would like to use an onboard UTA2 port for host connectivity. The port was previously connected to a tape library using native FC.
What must you do to configure the port for host connectivity?

Question59: What are three causes of a storage failover partial giveback? (Choose three.)

Question60: Click the Exhibit button.

Which two data protection deployment configurations shown in the exhibit are supported? (Choose two.)